Your First 1/10 Resin Figure: Scale, Space and Finish

A 1/10 resin figure is not a promise of one fixed height. Pose, base and sculpt change the finished footprint. Use the listing dimensions and parts diagram to plan what will fit on your shelf.

Remerlinds kits arrive unpainted and made to order. A first project goes better when you choose for space, assembly and finish before choosing only by the image.

Read the listing as a build plan

Use the product page for stated scale, dimensions, parts and finish options. Do not infer a final height from the scale label alone.

Plan the bench before purchase

Set aside a clean tray for parts, a dry-fitting area and a place where glued sections can rest without pressure.

Choose the finish level

Bronze is DIY Ready. Silver adds light sanding of support marks and filled drainage holes that would remain visible after assembly. Gold adds seam preparation, extra sanding and primer. You still assemble and paint the figure.

Choose with the finished shelf in mind

Leave clearance for the base and the pose, then browse the complete Remerlinds figure catalogue with those dimensions in view.